top of page

Load data for .25 ACP (6.35 Browning) + .250 | 35gr | AERO SO,- smax:6.10

Recommended Powder(s): Vihtavuori N310

.25 ACP (6.35 Browning) + .250 | 35gr | AERO SO,- smax:6.10

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.250 | 35gr | AERO SO,- smax:6.10
Bullet Weight:
35gr | 2.3g
Bullet Diameter:
0.250" | 6.35mm
Bullet Length:
0.496" | 12.6mm
Caliber:
.25 ACP (6.35 Browning) load data
Case Length (l3):
0.612" | 15.5mm
Cartridge Length (C.O.L.):
0.891" | 22.6mm
Seated Depth:
0.217" | 5.5mm
Shank Seated Depth:
0.217" | 5.5mm
Case Capacity:
4.9 Grains of Water | 0.32 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
17405 psi | 1200 bar
LID:
LID_B24_C193
Last updated:
2025-02-02

Load data for 14 loads in caliber .25 ACP (6.35 Browning) with .250 | 35gr | AERO SO,- smax:6.10 bullet and 7 powders such as Vihtavuori N310. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service. 

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AS 30
<<locked>>
88%
13663
79%
**1
93%
[ADI AS 50N]*
<<locked>>
91%
15084
87%
**04
87%
Hodgdon Clays
<<locked>>
79%
15519
89%
**5
99%
[Maxam CSB 4]*
<<locked>>
94%
14301
82%
**4
88%
Maxam CSB 5
<<locked>>
83%
13097
75%
**5
95%
Rottweil P 801
<<locked>>
97%
14968
86%
**19
95%
Vihtavuori N310 👍
<<locked>>
78%
14199
82%
**10
99%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AS 30]*²
<<locked>>
59%
7585
44%
**5
81%
[ADI AS 50N]*
<<locked>>
78%
11313
65%
**9
81%
Hodgdon Clays
<<locked>>
63%
11008
63%
**7
96%
[Maxam CSB 4]*
<<locked>>
80%
10849
62%
**9
82%
[Maxam CSB 5]*²
<<locked>>
56%
7034
40%
**5
82%
[Rottweil P 801]*
<<locked>>
75%
9369
54%
**2
85%
Vihtavuori N310
<<locked>>
65%
10457
60%
**9
96%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page